Thorough drying of framing, subfloors and walls after water extraction to prevent long term damage.
Removing standing water is only the first part of addressing a water loss. What remains inside walls, subfloors and framing after extraction can cause ongoing problems if it is not dried properly, including warped materials, weakened structural elements and conditions that support mold growth. MoldWise Restoration has performed structural drying for properties across Wanaque, NJ for 15 years, treating this stage as equally important to the initial water removal.
Structural drying relies on a combination of air movers and dehumidifiers working together. Air movers create airflow across wet surfaces, which speeds up evaporation, while dehumidifiers remove that moisture from the air so it does not simply resettle elsewhere in the property. The number and placement of this equipment depends on the size of the affected area and how deeply materials have absorbed water.
Throughout the drying process, we take moisture readings on framing, subfloors and walls to track progress rather than relying on a fixed number of days. Some materials dry faster than others, and factors such as material density and ambient humidity affect how long the process takes. Readings are compared against dry standard benchmarks for similar unaffected materials elsewhere in the property.
Structural drying is complete only when moisture readings confirm that affected materials have returned to a normal range, not simply when the space appears dry to the eye. This distinction matters because materials that look dry on the surface can still hold moisture internally, and closing up walls or installing new flooring over materials that are not fully dry is one of the most common causes of repeat mold problems.
Air mover and dehumidifier placement is based on the size and severity of the affected area.
Moisture readings guide the process rather than a fixed drying schedule.
Readings are checked against unaffected materials in the same property.
Full drying reduces the risk of hidden moisture causing mold later on.
Determine how deeply framing, subfloors and walls have absorbed water.
Position air movers and dehumidifiers based on the size of the space.
Track drying progress with regular meter readings across the affected area.
Close out drying once readings match unaffected materials nearby.
It varies based on the extent of water absorption and the materials involved, but most projects require several days of continuous air movement and dehumidification.
Moisture meter readings on the affected material are compared to a dry standard from unaffected materials in the same property to confirm the level is back to normal.
Yes, air movers and dehumidifiers are designed to run continuously in occupied spaces, though the noise level is worth planning around.
Reach our team to discuss your structural drying needs and get an estimate for the work involved.
Call 1 (877) 264-5920